Repeat Print of Gorgeous G10+ thermal inkjet printer

‘Repeat Print’ is used to print many times after sensor trigger one time and the distance of each two prints are same.

It’ s only availabe on the mode of ‘ Encoder +’ while using encoder.

Set how many prints you want to repeat after sensor trigger one time and ‘space setting’ :

The length of ‘ Spacing setting’ have to longer than the sum of ‘Print -go delay’/10 and the length of print data, otherwise it won’ t work.

When performing multi-head calculation,the maxiumu values of the length of data and print-go delay among them should be selected for calculation.

e.g.

Print-go delay is 50mm, length of print data is 38mm.

The length of Spacing setting should be >43= 50/10+38. Set 45mm will work.

Video: